For the full piece-by-piece table, see our record storage by capacity guide.
Most guides to record storage start with style. We think it makes more sense to start with your records. How many do you have, how many will you have in five years, and how much wall do you have to put them on? Once you know that, the list of pieces worth looking at gets short fast.
Below is every solid wood record storage piece we build, grouped by how many LPs it holds. Every number comes from our own product pages and our record storage by capacity guide. They are single-sleeve counts for standard 12-inch LPs with the record shelves filled.

Why solid wood matters for records
Records are heavy. A shelf full of LPs puts a steady load on the wood for years, and that is where cheaper furniture shows its age. A lot of mass-market media furniture is MDF or particleboard with a thin veneer or printed layer on top. It looks fine on day one. Over time, long shelves can sag under the weight, and a chipped edge or a stripped screw is hard to fix.
Solid hardwood holds a load better, can be repaired and refinished, and gets better looking as it ages. Our record consoles are handcrafted from responsibly sourced solid hardwood and finished with a hand-rubbed oil, and our drawer boxes are solid maple with dovetail joinery. When you shop anywhere, read the materials line. "Solid wood" and "wood veneer" are not the same thing, and the product page should tell you which one you are getting.
A quick way to count your collection
Measure your records in inches of shelf, the way they stand now, and multiply by about 7 for single sleeves. Gatefolds, box sets and records in outer plastic sleeves take more room, so plan on fewer than the listed number if you own a lot of them. Then leave room to grow. We go deeper on this in How Many Records Does a Record Console Hold?
Up to 300 records
A starter collection, a second listening spot, or the records you actually play every week.
- Solid Walnut Vinyl Record Storage Stand: about 50 LPs, tabletop
- Filipe Vinyl Cubby, 22"W: 155 LPs, 22"W x 27"H x 15"D
- Bakewell Vinyl Console: 240 LPs, 76"W x 20"H x 16"D
- Halfstack Bookcase: 280 LPs, 21"W x 43"H x 14"D
The Bakewell is long and low on purpose. It sits under a window or a TV and trades capacity for a quiet horizontal line.
300 to 700 records
Where a lot of collections land once the buying habit sticks.
- Heath Vinyl Console: 375 LPs, 52"W x 24"H x 16"D
- Vaughn Vinyl Tower: 540 LPs, 20"W x 81"H x 16"D
- Wilkinson Vinyl Console: 595 LPs, 48"W x 37.5"H x 16"D
- Couzens Vinyl Console: 630 LPs, 45"W x 34.25"H x 14"D
Short on floor space? The Vaughn is only 20 inches wide and goes up instead of out.
700 to 1,000 records
The sweet spot for a main listening room.
- Bainbridge Vinyl Console: 810 LPs, 56"W x 34.25"H x 14"D
- Moline Vinyl Console: 810 LPs, 56"W x 41"H x 14"D
- Sesto Vinyl Console: 950 LPs, 65"W x 31"H x 14"D
- Mullins Vinyl Console: 960 LPs, 65"W x 31.75"H x 14"D
- Smith Vinyl Console: 990 LPs, 45"W x 48"H x 14"D
The Ulrich (170 to 720 LPs) and the Romo 2.0 (120 to 920 LPs) show a range because you can split them between record shelves and enclosed storage. The more of the piece you give to records, the higher the number.

1,000 records or more
For the serious collection, or the one that is headed there.
- Knodler Vinyl Console: 1,160 LPs, 40"W x 61.75"H x 14"D
- Sesto Vinyl Console, 82" Wide: 1,220 LPs, 82"W x 31"H x 14"D
- Okopal Vinyl Console: 1,250 LPs, 56"W x 48"H x 14"D
- Vissing Vinyl Console: 1,620 LPs, 56"W x 61.75"H x 14"D
- Danielson Vinyl Console: 2,060 LPs, 78"W x 79.5"H x 16"D
Notice that the Bainbridge, Moline, Okopal and Vissing are all 56 inches wide. Going taller takes the same footprint from 810 records to 1,250 to 1,620. If your floor is tight but your wall is tall, go up.
Between sizes?
Most of our pieces can be built wider, taller or in a different wood, and you can choose Walnut, White Oak, Maple, Cherry, Madrone or Myrtle. If your collection or your wall falls between sizes, start a custom design and we'll build around the records you actually have. Not sure about the wood? Order a sample and see it in your own light.
Everything is built to order. Current lead time is about 8–12 weeks from the day you order until your piece is ready to ship or deliver. We'll send you photos before it ships.
Frequently asked questions
What size record console do I need for 500 records?
Look in the 700 to 1,000 range if you are still buying. A piece that holds about what you own today will be full soon, and gatefolds take more room than single sleeves.
Is solid wood better than MDF or veneer for record storage?
For heavy, long-term loads like LPs, solid hardwood holds up better, and it can be repaired and refinished. Check the materials line on any product page to see what you are actually buying.
How are your capacity numbers measured?
They are single-sleeve counts for standard 12-inch LPs, with every record shelf filled end to end.
What is the largest record storage piece you make?
The Danielson Vinyl Console holds about 2,060 LPs. If you need more than that, we can build it custom.
How long does a made-to-order piece take?
Everything is built to order. Current lead time is about 8–12 weeks from the day you order until your piece is ready to ship or deliver. We'll send you photos before it ships.
Find your size: Compare every piece by capacity, or browse Vinyl LP Storage.



