The first question almost everyone asks us about a record console is the simplest one: how many records will it hold? It sounds like it should have a clean answer, and for us it does, because we count. Every record storage piece we build has a single-sleeve LP capacity on its product page, and we keep the whole list in one place on our record storage by capacity guide.
This post walks through those numbers, what they actually mean, and how to use them to pick a size without guessing.
What "single-sleeve capacity" means
When we say a console holds 810 records, we mean 810 standard 12-inch LPs in their single sleeves, standing upright, shelves filled end to end. That is the honest maximum. Real collections are rarely all single sleeves.
Gatefolds, box sets and records kept in outer plastic sleeves all take more room. If a good share of your shelf is double albums or deluxe reissues, plan on fewer than the listed number. We would rather you size up a little than end up with a console that is full the week it arrives.
How to count your own collection
You don't need an exact count. Measure your records in inches of shelf, the way they stand now, and multiply by about 7 records per inch for single sleeves. That rule of thumb comes from the same counting we use for our own pieces, and it gets you close enough to choose a size.
Then think about the next five years. Most collections grow, and a console is something you will live with for a long time. If you have 500 records today and you are still buying, a piece in the 700 to 1,000 range is usually the more comfortable choice.
Our record storage, by capacity
Here is how our current pieces fall into size bands. Every figure below comes straight from the product pages and the capacity guide.
Up to 300 records
Good for a starter collection, a second listening spot, or the records you play most.
- Solid Walnut Vinyl Record Storage Stand: about 50 LPs, tabletop
- Braca Media Console: 140 LPs, 76"W x 20"H x 16"D
- Filipe Vinyl Cubby, 22"W: 155 LPs, 22"W x 27"H x 15"D
- Bakewell Vinyl Console: 240 LPs, 76"W x 20"H x 16"D
- Pease Storage Bench: 270 LPs, 40"W x 18.5"H x 14"D
- Halfstack Bookcase: 280 LPs, 21"W x 43"H x 14"D
300 to 700 records
This is where a lot of serious-but-not-obsessive collections land.
- Warner Foyer Bench / LP Vinyl Storage: 350 LPs, 52"W x 18"H x 16"D
- Heath Vinyl Console: 375 LPs, 52"W x 24"H x 16"D
- Mullins Vinyl Bookcase: 530 LPs, 22"W x 75"H x 15.5"D
- Vaughn Vinyl Tower: 540 LPs, 20"W x 81"H x 16"D
- Wilkinson Vinyl Console: 595 LPs, 48"W x 37.5"H x 16"D
- Couzens Vinyl Console: 630 LPs, 45"W x 34.25"H x 14"D
- Halfstack Bookcase, Double Wide: 630 LPs, 44"W x 42"H x 14"D
700 to 1,000 records
- Bainbridge Vinyl Console: 810 LPs, 56"W x 34.25"H x 14"D
- Moline Vinyl Console: 810 LPs, 56"W x 41"H x 14"D
- Emerson Vinyl Console, 2 Drawer: 935 LPs, 94"W x 30"H x 13"D
- Sesto Vinyl Console: 950 LPs, 65"W x 31"H x 14"D
- Mullins Vinyl Console: 960 LPs, 65"W x 31.75"H x 14"D
- Lopez Vinyl Console: 980 LPs, 45"W x 54.75"H x 14"D
- Smith Vinyl Console: 990 LPs, 45"W x 48"H x 14"D
A few pieces, like the Ulrich and the two Romo consoles, show a range (for example 150 to 900) because the layout can be split between record shelves and enclosed or drawer storage. The more of the piece you give to records, the higher the number.
1,000 records or more
- Knodler Vinyl Console: 1,160 LPs, 40"W x 61.75"H x 14"D
- Sesto Vinyl Console, 82" Wide: 1,220 LPs, 82"W x 31"H x 14"D
- Okopal Vinyl Console: 1,250 LPs, 56"W x 48"H x 14"D
- Fullstack Bookcase, Double Wide: 1,400 LPs, 48"W x 74"H x 14"D
- Vissing Vinyl Console: 1,620 LPs, 56"W x 61.75"H x 14"D
- Danielson Vinyl Console: 2,060 LPs, 78"W x 79.5"H x 16"D
Same width, very different capacity
One thing the list makes plain: width alone doesn't tell you much. The Bainbridge, Moline, Okopal and Vissing are all 56 inches wide. Going up in height takes you from 810 records to 1,250 to 1,620 on the same footprint. If floor space is tight but you have wall height to spare, a taller piece is often the better answer than a longer one.
The reverse is true too. The Bakewell and the Braca are 76 inches wide but only 20 inches tall, so they hold 240 and 140 records. Those are low pieces meant to sit under a window or a TV, and they trade capacity for a quiet, horizontal line.
When none of the sizes fit
Every piece on the list is made to order from solid hardwood in our Pacific Northwest workshop, and most can be built wider, taller or in a different wood. If your collection falls between sizes, or your wall does, start a custom design and we'll build around the records you actually have.
Frequently asked questions
How many records fit per inch of shelf?
About 7 single-sleeve LPs per inch. Gatefolds and records in outer sleeves take more room.
Are your capacity numbers for full shelves?
Yes. They are single-sleeve counts for standard 12-inch LPs, with every record shelf filled. Leave yourself room to flip through.
What is the largest record console you make?
The Danielson Vinyl Console holds about 2,060 LPs at 78"W x 79.5"H x 16"D. If you need more than that, we can build it custom.
How long does a made-to-order piece take?
Everything is built to order. Current lead time is about 8–12 weeks from the day you order until your piece is ready to ship or deliver. We'll send you photos before it ships.
Find your size: Compare every piece by capacity, or see the Vinyl LP Storage collection.
